Description

A stable and reliable punching machine for production of high quality cards with an automatic sheet feeder. The punched cards are stored in card magazines. All the electrical parts are inside the machine. We have made sure that they are easily accessible. The built-in hydraulic aggregate is noise reduced. The compact construction diminished the size of the machine and therefore the floor space needed.

A further advantage is the easily understandable machine control interface. To save your budget the machine could be installed by your own technician after being trained by us in Germany.

Function

The sheets piled up on a palette are transported by the sheet feeder onto the alignment table. The transport is done through suction cups. The sheet is adjusted across and exactly positioned to the first register marks, transported lengthwise into the punching tool. According to the longitudinal marks the separate rows are punched. Whilst the following sheet is being punched, the cards already punched are transported into the magazine on the conveyer belt. The card transportation does not influence the machine cycle, therefore may be slow thus almost excluding the problem of a card tailback.

The card amount is to be preset, accordingly the magazine is filled, thereupon automatically transported via conveyer belt to the take-out position, and the next magazine is brought to loading position. The leftover grid is transported by the grab pivot out of the puncher.

The punch impulse is issued by hydraulic excenter. You are able to adjust the output of the pump to adapt the machine power to the card material for optimal punch quality.

Technical Data:

• Machine Size: approx. 2400 (L) x 1360 (W) x 1800 (H) mm
  
• Sheet layout: 3 x 8 cards up to 3 x 10 cards
  
• Card thickness: 0.3 – 1.0 mm
  
• Machine Performance: up to 18,000 cards per hour by 10 rows, depending on the sheet quality
• Power supply: 3-phase 400V, 6 kVA
  
• Compressed air supply: 6 bar